"This 12v inverter will require over 850 amps to reach its rated capacity of 10000 watts.  This is a LOT of large wires and BIG battery bank.  If you really need 10000 watts, you need to look at a 48 bolt battery bank.  Wagan only…"

"Are the Cree's the only LED's you are using?  If other brands, what are they.  I might have to migrate the EcoSmart's to remote areas and put in the Cree's to eliminate the interference."

"I replaced all the CFL's in the house with LED's over the past 2 years.  The "standard" looking bulbs are EcoSmart 60-watt equivalent daylight bulbs.  I am pleased with the light, but the emit RF that my fire scanner…"

"Most inverter operator's manuals recommend a certain size wire for certain lengths.  There are many amperage wire gauge charts on the internet to see what fits into your scheme of things.  Always allow for power loss due to inverter…"

"No problem running all of that at the same time.  The AC compressor was much louder due to the modified sine wave.  I am getting it back online in the next few days.  It was replaced by the Tiger Claw."

"Dave: I am not sending it in.  Dale likes tinkering with my destroyed equipment.  He Brought my dead Rogue back.  I will probably send him the Tiger Claw to experiment with.  I am sure he will let us know what killed it."

"A modified sine wave is good for lighting and electric heating elements.  Motors need a Pure (True) Sine Wave to run cooler and more efficient.  I smoked my Tiger Claw 1500w today with a 500 watt radiator heater, laptop computer, computer…"

"I have not used this inverter, but had the 1500 watt from HF for 2 years. It worked flawlessly for 2 years, until it released the magic smoke.  It was my fault, not the inverters.  I recently bought the 2000 watt HF inverter.  It was…"

"As the batteries reach the absorb voltage, the charge controller will reduce the amp input while holding the batteries at absorb.  As long as the voltage settings in the charge controller are set according to the battery manufacturer's…"

"4 gauge wire will work for everything in your list.  I use breakers from each panel at the combiner box.  The wire from the combiner box goes into a breaker before going into the charge controller.  The charge controller output goes…"

"I have my DM145's run into a Breaker box.  Will you run the panels parallel, or in series?  This will determine the wire size you need from the breaker box to the charge controller.  It will also help determine how cheap of a…"

"Kevin, that would work fine.  You could use a smaller gauge wire if you went with 5 in series (5 x 22.5) for 112.5 volts.  This would give you a safe buffer for those cold days when the panels will exceed this voltage.  Morningstar…"

"You need to get the batteries up to absorb charge.  This is typically over 14 volts.  The voltage is determined by the battery manufacturer.  Contact them for the specs on absorb and float voltages.  A battery will slowly loose…"

"I use the Roger and the MidNite Solar Classic 150.  They are both great controllers.  The Rogue is not on the market due to a new model coming out soon.  The Classic 150 is price (over $600).  I prefer MPPT controllers to get…"